|
This was a multi part process and took some time.
Fortunately, my buddy knew what he was doing. My black diamond plate was
still on back order so we had to spray the trim strips individually. I put
the trim strips on after I installed the diamond plate. First we sanded the cabinets and taped off the area. Then
we sprayed everything with primer. We let dry, lightly sanded and sprayed
everything with one coat of red lacquer. We let dry, lightly sanded and
sprayed everything again with black lacquer. We let dry and strategically
sanded the bar in areas to make it look like the top coat of black was
wearing thin. This is where the red lacquer shows through. We
then sprayed with a clear coat that was very soft and gave everything a satin
finish. |
|
page 1 of 3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
